Reading Time: 5 minutes

Carbon capture and storage facilities can sequester large amounts of carbon dioxide emissions and prevent them from entering the atmosphere – but effective and cost-efficient monitoring technology is needed to ensure the CO2 being put into the ground is actually staying there.

Mirko van der Baan

Mirko van der Baan

“The challenge here is that we want the CO2 to stay underground for generations, and therefore it’s not sufficient to just store it underground and forget about it. It needs constant, consistent monitoring over long periods of time,” explained Mirko van der Baan, a researcher in the University of Alberta’s Faculty of Science. “That can become expensive very quickly depending on the technology we’re using.”

Van der Baan is part of an interdisciplinary team looking to develop monitoring technology to track very small microseismic events. Observations of such events can be used to verify the integrity of the storage unit and assess the level of seismic activity.

“We want to have something that’s both environmentally and economically sustainable,” said van der Baan.

The project, called “Effective monitoring of long-term site stability for transparent carbon capture and storage hazard assessment,” or ENSURE, received $1 million in funding support announced on March 3. ENSURE is a partnership with government and industry and involves international partners as well as a component that analyzes public perception.

Approximately $500,000 of in-kind funding was given by the Quest venture, located in the Scotford Upgrader operated by Shell Canada Ltd. and owned by Canadian Natural Resources Limited, Chevron Canada Oil Sands Partnership and Shell Canada Ltd. The Quest team is providing infrastructure and personnel to help move the project forward in the Quest Carbon Capture and Storage facility. The funding was matched by Emissions Reduction Alberta to support the academic component of the project, allowing researchers to analyze the data from the Quest facility and the results of the public perception surveys that will be done.

One of the monitoring technologies being tested by ENSURE involves fibre optic cables – very similar to those used to deliver internet service. These cables are deployed in the wells at the CO2 injection site.

When sound waves from microseismic events interact with the cable, it gets locally extended or contracted and the resulting signal can be processed to generate seismograms very similar to those generated by traditional or mechanical seismometers. “We’re looking at whether this is a cost-effective way of monitoring,” van der Baan explained.

The U of A team van der Baan is leading will work with the Quest team by installing fibre optic cables in the injection wells at the facility and giving the researchers access to existing data – a benefit from having been monitoring the Quest site for five years.

project quest carbon capture storage facility Shell

A pilot project at the Quest Carbon Capture and Storage facility near Edmonton will see U of A researchers working with industry partners to develop precise monitoring technology and gauge public perceptions about carbon storage. (Photo: Shell Canada Ltd.)

While van der Baan and his team are looking at the Quest facility, ENSURE is part of a much larger international project involving partners in numerous other countries, with teams also looking at local carbon capture and storage facilities and evaluating the monitoring systems there.

Through a combination of the existing data, new data, and international partners and the insights they glean, the researchers hope to develop a traffic light threshold system that will help in evaluating these microseismic events. This system is already used with induced seismicity, associated with things like saltwater disposal to gauge acceptable levels of ground motion, explained van der Baan, who also leads the Microseismic Industry Consortium.

“One of the aims is to look at traffic light systems and whether they could be used for CO2 storage monitoring as well, and examining what would be a system that is both tenable – something we can measure over longer periods of time – and that balances economic versus public safety measures,” van der Baan said.

Another critical component of the project, also happening on an international scale, is assessing and analyzing public perceptions about carbon capture technology. Led by Sven Anders, an agricultural economist and professor in the Faculty of Agricultural, Life & Environmental Sciences, it’s the biggest survey of its kind on carbon capture and storage, aimed at understanding the perspectives of thousands of people in Canada, Norway, Germany, Italy and the Netherlands, among other countries.

The perception part of the project addresses another essential need, one van der Baan refers to as “public licence to operate” – the public’s willingness to accept new carbon capture and storage technology.

As van der Baan explained, one concern companies may have is that more effective monitoring tools means even smaller fractures generated are tracked – even if they aren’t of concern from a ground stability or seal integrity perspective. The increase in these microseismic events could be alarming to the public. Anders and his team are looking to evaluate that relationship between perceived and actual risks to see how to best inform and educate the public about carbon capture technology.

Everyone reacts differently depending on their level of trust in technology, their level of trust in the source of the information and the overall context within their country, Anders explained. For example, a person living in an area prone to seismic activities with actual risk, such as earthquakes, might be far more sensitive to low levels of ground shaking, perceiving even the safe microseismic events as a risk.

“Based on these individual studies, we can uncover differences in opinions and perspectives that are important for the larger topic of carbon capture storage as a technology. That will be quite informative,” said Anders.

The overall project will provide a key contribution to help accelerate the time to market for carbon capture storage technology by creating a more effective, cost-efficient monitoring system and identifying the best ways to explain the innovative technology to members of the public, van der Baan said.

“It’s truly a joint academia/government/industry project. It gives us access to data we don’t normally get access to, and it gives us access to expertise, because all these companies have a lot of expertise. And it will help us to see and really identify what the public may think versus what we as experts think.”

“These very large players, all gathering together, sharing what otherwise would be confidential data that they have invested a lot of money into generating – that’s a very cool and valuable aspect,” added Anders.

| By Adrianna MacPherson

Adrianna is a reporter with the University of Alberta’s Folio online magazine. The University of Alberta is a Troy Media Editorial Content Provider Partner.


The opinions expressed by our columnists and contributors are theirs alone and do not inherently or expressly reflect the views of our publication.

© Troy Media
Troy Media is an editorial content provider to media outlets and its own hosted community news outlets across Canada.